Troubleshooting Guide



Wiring - N


0. FAQs:


  1. Cabinets

  2. Covers

  3. Dealers

  4. Help

  5. Insulation

  6. Jets

  7. Ozonators

  8. Pre-installation

  9. Set-up

  10. Shells

  11. Terminology

  12. Water quality

  13. Winterizing

  14. Wiring




Note: Most installation problems are caused by electrical wiring errors. The most common wiring problem is when the neutral wire from the spa is connected to the Neutral bus in the GFCI. The Neutral wire from the spa should be connected to the Neutral lug on the GFCI breaker. Click here to see an image of this type of wiring error.


A certified, licensed electrician should install all wiring to your spa as per any NEC and local codes.


Click here for US-Canada 240V wiring diagram


Click here for US-Canada 120V wiring diagram


Click here for 1-phase European wiring diagram


Click here for 2-phase European wiring diagram


Click here for 3-phase European wiring diagram




A GFCI box must be installed at least five feet away from your spa.

We hope that you have found this guide useful. If you have suggestions on how to make this particular web page better, please email us at


Author: Philip Rastocny